E
N
G
LI
S
H
ENGLISH
23
out quickly as otherwise the doughnuts will not become
evenly brown.
NOTE:
• Do not put in too much mixture or mixture that is too
liquid as otherwise excessive steam and possibly also
mixture may be expelled in the area of the baking
surfaces.
• You should only put in (additional) mixture when the
green control lamp is on. This will produce better
baking results.
• The doughnuts will always be browner on the undersi-
de than on the top. This is because the mixture is fi rst
baked from the bottom and the top is only baked after
the mixture has risen.
5. Please ensure that you measure in the quantity of dough
correctly, as excess dough runs over the edges and soils the
device. Gently close the cover. Close the lid catch.
6. The green control lamp switches on and off during baking
in order to maintain the baking temperature. Allow the
doughnuts to bake for only 3-4 minutes in the device. The
baking time depends on your individual taste. The longer
the doughnuts remain in the device, the greater the level of
browning.
7. Open the lid catch carefully and then fold up the lid. The
doughnuts can be gently lifted at the sides with suitable
wooden or plastic cutlery and then removed with a spatula
or similar device. Do not use pointed or sharp objects to
avoid damaging the coating of the baking surfaces.
8. Lightly grease the baking surfaces again as required after
each baking process.
9. The baking surfaces must always be kept closed during
pauses in the baking.
Switching Off
If you would like to interrupt operation or switch the device off,
remove the plug from the socket. The red control lamp goes off.
Cleaning & maintenance
• Pull out the mains plug and allow the unit to cool down.
• Brush off the crumbs or residues from the baking surfaces
and the edges.
• The entire device should only be cleaned with a slightly
damp cloth.
• Do not use abrasive detergents.
• The machine must never be immersed in water!
Recipe for approx. 10 Portions (10 x 6 Doughnuts)
260g fl our, 1 packet of baking powder, 130g sugar, 1 packet of
vanilla sugar, 250ml milk, 3 eggs, 5 tablespoons of oil, 1 pinch of
salt, 30g icing sugar
• Stir the fl our, baking powder, sugar, vanilla sugar, milk, eggs,
oil and salt to form a smooth mixture.
• Prepare the mixture as described and sprinkle the fi nished
doughnuts with icing sugar.
You can also add ground nuts, cocoa powder, grated chocolate
or chopped almonds to the mixture. If the mixture becomes too
solid when the above items are added you can also pour in a
little milk. The icing sugar can also be made into a glaze with
lemon or cherry juice before being coated on to the doughnuts.
Technical Data
Model: .............................................................................. DM 3127
Power supply: ............................................................230 V, 50 Hz
Power consumption: ............................................................800 W
Protection class: ...........................................................................
Ι
Net weight: ...........................................................................1,4 kg
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance with
the latest safety regulations.
Subject to technical changes without prior notice!
Guarantee
The device supplied by our Company is covered by a 24 month
guarantee starting on the date of purchase (receipt).
During the life of the guarantee any fault of the device or its
accessories ascribable to material or manufacturing defects will
be eliminated free of charge by repairing or, at our discretion, by
replacing it. The guarantee services do not entail an extension
of the life of the guarantee nor do they give rise to any right to a
new guarantee!
Proof of the guarantee is provided by the proof of purchase.
Without proof of purchase no free replacement or repair will be
carried out.
If you wish to make a claim under the guarantee please return
the
entire
machine in the
original packaging
to your dealer
together with the receipt.
Defects to consumables or parts subject to wearing as well as
cleaning, maintenance or the replacement of said parts are not
covered by the guarantee and hence are to be paid!
The guarantee lapses in case of unauthorized tampering.
After the expiry of the guarantee
After the expiry of the guarantee repairs can be carried by the
competent dealer or repair service against the payment of the
ensuing costs.
05-DM 3127_NEU.indd 23
05-DM 3127_NEU.indd 23
19.02.2008 10:04:16 Uhr
19.02.2008 10:04:16 Uhr
