GB
44
• Before
fi lling the water tank (8) remove the mains lead. Please do not fi ll the water tank
higher than the MAX mark (approx. 290 ml).
Overview of the Components
1 Continuously adjustable
7 Spray nozzle
temperature regulator
8 Transparent water container
2 Control lamp
9 Base
3 Steam jet button
10 Ceramic sole plate
4 Steam volume regulator
11 Flexible line cord entry
5 Spray button
12
Self clean
button
6 Filler opening for the water tank
First Use of the Machine
• Clean the ironing base with a slightly damp cloth.
• Fill the water reservoir at the refi ll opening (6), using a fi lling container. Close the lid of
the tank and lock it in place.
• Preferably use distilled water or clear tap water (maximum water hardness level 2). If
water is harder, used distilled water only.
• Do not fi ll battery water, water from the clothes dryer and water containing additives
(such as starch, perfume, softener or other chemicals) into the water reservoir. This
could damage the iron due to residues forming in the steam chamber. These residues
may cause impurities to the fabric when dropping out of the holes in the soleplate.
Using the Machine
Note:
Only clothes should to be ironed with this machine.
• Before you use the device please remove any protective foil and stickers that may be
present from the ceramic sole plate.
• Completely unwind the line cord.
Ironing without steam
(steam jet regulator on „ “)
1. Place the iron on its stand.
2. Turn the steam regulator (4) to „ “.
3. Always set the temperature control to „
MIN
“ before connecting the appliance to a power
point, or before disconnecting it.
05-DB 3061 K 44
27.04.2006, 15:46:25 Uhr
Содержание DB 3061 K
Страница 69: ...05 DB 3061 K 69 27 04 2006 15 47 02 Uhr ...