14
10)
Lift chimney section
(D)
upwards until it reaches the ceiling. You must ensure that it
is perpendicular to the hood.
o
Mark the side measurements of both sides of chimney section
(D)
on the wall with a
pencil and then remove chimney section
(D)
.
11)
Take the flat bracket
(E)
and
place it between the two pencil
marks that you made in step 9.
o
Keeping the bracket in contact
with the wall, use a pencil to
mark on the wall the anchoring holes that are cut out of the bracket.
12)
Using a 6 mm drill bit, drill two holes on
the pencil markings that you made in step 10.
Insert rawl plugs into the holes and then use
a screwdriver to secure the fixing bracket to
the wall.
Содержание CLRH60LSS
Страница 23: ......
