Classique CLF64TCB Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 30

Classique CLF64TCB Скачать руководство пользователя страница 22

20

Care and cleaning

What?

How?

Important!

Everyday soiling on
glass (fingerprints,
marks, stains left by
food or non-sugary
spillovers on the
glass)

1. Switch the power to the

cooktop off.

2. Apply a cooktop cleaner while

the glass is still warm (but not
hot!)

3. Rinse and wipe dry with a clean

cloth or paper towel.

4. Switch the power to the

cooktop back on.

• When the power to the cooktop is

switched off, there w

ill be no ‘hot

surface’ indication but the cooking
zone may still be hot! Take extreme
care.

• Heavy-duty scourers, some nylon

scourers and harsh/abrasive cleaning
agents may scratch the glass. Always
read the label to check if your cleaner
or scourer is suitable.

• Never leave cleaning residue on the

cooktop: the glass may become
stained.

Boil-overs, melts, and
hot sugary spills on
the glass

Remove these immediately with a
fish slice, palette knife or razor
blade scraper suitable for ceramic
glass cooktops, but beware of hot
cooking zone surfaces:
1. Switch the power to the

cooktop off at the wall.

2. Hold the blade or utensil at a

30° angle and scrape the
soiling or spill to a cool area of
the cooktop.

3. Clean the soiling or spill up with

a dish cloth or paper towel.

4. Follow steps 2 to 4 for

‘Everyday soiling on glass’,
above.

• Remove stains left by melts and

sugary food or spillovers as soon
as possible. If left to cool on the
glass, they may be difficult to
remove or even permanently
damage the glass surface.

• Cut hazard: when the safety cover

is retracted, the blade in a scraper
is razor-sharp. Use with extreme
care and always store safely and
out of reach of children.

Spillovers on the
touch controls

1. Switch the power to the

cooktop off.

2. Soak up the spill
3. Wipe the touch control area

with a clean damp sponge or
cloth.

4. Wipe the area completely dry

with a paper towel.

5. Switch the power to the

cooktop back on.

• The cooktop may beep and turn

itself off, and the touch controls
may not function while there is

liquid on them. Make sure you wipe the
touch control area dry before turning
the cooktop back on.

• The touch controls should only be

cleaned with mild detergent and a soft
cloth to prevent any damage to the
serigraphy which will not be covered by
warranty.

«
...
20
21
22
23
24
...
»

Содержание CLF64TCB































Отзывы:

Нет отзывов