Classic Exhibits SYMPHONY SYK-1021, Инструкции по установке

Страница: 9 / 11

© 2021
Step 5 of 7
Order #XXXXX
Locked layer contains
placeholder marks.
Workstation
Light
Light
When assembled
*
*
*
Attach clamp of stem light
to top of horizontal extrusion
where desired.
Twist knob on back to
tighten in place.
Light Attachment
*
knob
Light
BACK VIEW
Extrusion
Hook the Mounting Bracket
over the vertical extrusion.
Slide
Bracket
forward
Slide down onto
V4 connector
Tighten knobs
to secure.
Mounting
Bracket
Workstation Bracket Attachment
Slide bracket forward, then
down onto V4 connector.
Tighten thumb screws to
secure connection to inside
of frame.
Bracket
TOP VIEW SIDE VIEW
1 2 3
V4
V4 connectors stay permanently
attached to vertical extrusion.
*
Threaded
Studs
Wing
nuts
Counter Top
Mounting
Bracket
Counter
Legs
UNDERSIDE VIEW
3) Attach power cords to
wireless chargers.
2) Connect Counter Top to
Mounting Bracket, using
wing nuts.
1) Attach threaded studs on underside
of Counter Top to Counter Legs;
secure with wing nuts.
Workstation Assembly
Keep cords attached to
underside of counter top.
Underside View of Counter
To Power
USB
charging
pad
power
cords
charging
block
Counter Top
Graphic
Steps:
1) Attach Workstation Mounting Bracket
to backwall vertical as shown.
See Workstation Bracket Attachment detail.
2) Assemble Workstation legs & counter top to
bracket. See Workstation Assembly detail.
3) Affix Graphic to front of workstation assembly,
using Velcro.
4) Attach Lights to top of backwall as shown.
See Light Attachment detail.
Backwall Attachments