7
HTS-20
SAFETY
MAINTENANCE SAFETY
IN GENERAL
•
Maintain machine according to manufacturer's
schedule and instructions for maximum safety and
best results.
•
Park machine on level ground.
•
Never allow untrained personnel to service machine.
• Guards should only be removed by a qualified
technician for maintenance or service. Replace when
work is completed.
•
Adjust or repair only after the engine has been stopped
and the seeder has stopped moving.
•
Disconnect spark plug wire(s) before doing any
maintenance.
•
Replace parts if worn, damaged or faulty. For best
results, always replace with parts recommended by the
manufacturer.
•
Do not dismantle the machine without releasing or
restraining forces which may cause parts to move
suddenly.
•
Provide adequate support, e.g. jack stands for lifted
machine or parts if working beneath.
•
Do not put hands or feet near or under rotating parts.
•
Clean up spilled oil or fuel thoroughly.
• Replace faulty mufflers.
• To reduce fire hazards, keep the engine, muffler, and
fuel storage area free of grass, leaves, debris buildup
or grease.
•
Never attempt to make adjustments while the engine
is running except for repairs or adjustments as
specifically noted, such as for carburetor adjustment,
where the engine must be running. Keep hands and
feet clear of moving parts in these circumstances.
STORAGE SAFETY
•
Stop the engine and allow to cool before storing.
•
Drain the fuel tank outdoors only.
•
Store fuel in an approved container in a cool, dry place.
•
Keep the machine and fuel containers in a locked storage
place to prevent tampering and to keep children from
playing with them.
•
Do not store the fuel container or equipment with gasoline
in the tank inside a building where fumes may reach an
open flame or spark.
•
Appliances such as furnaces and water heaters with a
pilot light have an open flame.
•
Keep gasoline storage area free of grass, leaves and
excessive grease to reduce fire hazard.
• Clean debris from cutting units, drives, mufflers and
engine to help prevent fires.
•
Clean up any spilled gasoline or oil in the storage
area.
FUEL SAFETY
• Gasoline is flammable; gasoline
vapors are explosive. Use extra care
when handling.
• Store only in containers specifically
designed for fuel.
•
When refueling or checking fuel level:
- Stop the engine and allow to cool;
- Do not smoke;
- Refuel outdoors only;
- Use a funnel;
- Do not overfill;
- If fuel is spilled, do not attempt to start the engine
until the spill is cleaned up and vapors have cleared.
- Replace caps on fuel containers and tanks securely.
Sparks from static electricity can start fires or cause
explosions. Flowing fuel can generate static electricity. To
prevent static electricity sparks:
• Keep containers electrically grounded. Do not fill
containers in a vehicle or on a truck or trailer bed with
a plastic liner. Fill containers on the ground away from
the vehicle.
•
When practical, remove gasoline powered equipment
from the truck or trailer and refuel it on the ground.
If equipment must be refueled on the truck or
trailer, refuel from a portable container rather than a
dispenser nozzle.
•
Keep the dispenser nozzle in contact with the rim
of the fuel tank or container opening until fueling is
complete. Do not use a nozzle lock-open device.
•
If fuel is spilled on clothing change it immediately.
WARNING
BLADES
-
Blades are sharp and can cut. Use
extra caution when handling. Wear
appropriate personal protective
equipment.
-
Only replace blades. Never straighten or weld
them.
-
Keep other persons away from blades.
WARNING
