Classe Audio CT-SSP Скачать руководство пользователя страница 18

Страница: 18 / 70

Component Video Inputs

The SSP supports two component video inputs, each with three RCA

connectors labeled 1 and 2 – the component video format requires three

separate cables labeled Pr, Pb, and Y. Use these inputs when the output of

your source is component.

Although still analog, a component video signal provides a much sharper

image than S-Video or composite formats. The component video delivers

color video signals by maintaining the three YUV signal segments in three

separate channels. YUV is a video format definition which defines the

“color space”, a mathematical model of the color within an image, of a

video signal. Y stands for luma (brightness), U for a color difference signal

(blue minus luma or B-Y), and V for second color difference signal (red

minus luma or R-Y). Therefore, the three sections of the component signal

are Y (luminance – the black & white portion of the video), Pb (Blue

Color Difference), and Pr (Red Color Difference).

To connect the source component video output cables to the SSP

component video input rear panel connectors:

• Use the red cable for the Pr (Red Color Difference) connectors.

• Use the blue cable for the Pb (Blue Color Difference) connectors.

• Use the green cable for the Y (Luminance) connectors.

The SSP accepts component video at either standard definition (SD) or

high definition (HD) video rates. Component video is NOT accepted at

1080p via analog component connections.

NOTE: Although the SSP component inputs support all resolutions

except 1080p, some source material will be restricted to 480p at the

source.

HDMI Inputs

The SSP supports five HDMI inputs, labeled 1 to 5. Whenever possible,

we recommend the use of HDMI for all audio and video source input

connections. The SSP is HDMI v.1.4 enabled, supporting 2D video at

resolutions up to 1080p @ 24/50/60 fps, standard 3D video formats with

resolutions up to 1080p @ 24 fps, Audio Return Channel (ARC), HDMI

Ethernet Channel (HEC), Deep Color and x.v.Color(xvYCC).

The HDMI (High Definition Multimedia Interface) format is the only

available single-cable digital pathway for both video and audio signals,

providing higher performance levels and simplifying component-to-

component connections. HDMI is backwards compatible with the

earlier video-only DVI (Digital Video Interface) standard. Adaptors

to convert a DVI cable connector to HDMI and vice-versa are readily

available. The HDMI standard also incorporates HDCP (High Definition

Content Protection); a separate content-protection technology to prevent

unauthorized distribution or duplication of copyrighted material.

Содержание CT-SSP







































































Результаты поиска

Содержание CT-SSP

Отзывы:

Похожие инструкции для CT-SSP

Бренды по названию

Популярные бренды

Classe Audio CT-SSP, Руководство пользователя

Результаты поиска

Содержание CT-SSP

Отзывы:

Похожие инструкции для CT-SSP

Бренды по названию

Популярные бренды