Classe Audio CAV-75, Руководство пользователя

Страница: 10 / 13

10
- -
PROTECTION CIRCUIT
The Classé CAV-75 is equipped with rail fuses to protect the output drivers (see fig.1, page 7)
and mosfet fuses to protect the mosfets, which are used as pre-drivers for the output stage of the
amplifier. In the event that a short circuit or other problems would occur at the output of the
amplifier, either or both of these fuses may blow in an attempt to protect the amplifier.
To return the unit to proper operation, TURN THE UNIT OFF. Make sure that the situation
that has triggered the protection circuit has been corrected. Failing to correct the situation prior to
re-starting the unit can result in damaging vital components in the unit.
Replace mosfet or rail fuses (see page 4 for fuse values) that are damaged with exactly the
same type and value. Spare fuses for the mosfet and the output section are supplied with the unit
and included in the instruction booklet package. After a careful inspection of all connections and
components in the system, re-start the unit. If unit still goes into protection mode, contact your
local dealer or Customer Service at the Classé Audio factory---(514) 636 63 85.