manualshive.com logo in svg

CLAS OP 1402, Руководство пользователя, Страница: 7 / 12

Поделиться
Скачать
CLAS OP 1402 Скачать руководство пользователя страница 7

OP 1402

1/2" D. IMPACT WRENCH 1756Nm

TOOLING APPLICATION

AIR SUPPLY REQUIREMENTS

• Supply the tool with 6.3bar of clean, lubricated, dry air. Higher pressure drastically reduces 

tool life and/or can cause sever injury.

• Connect the tool to the airline using pipe, hose and fitting sizes.

• Do not install a quick coupler directly into the air hose connector.

• In order to have the tool working to full satisfaction, the minimum air supply must beat least 

10% higher than the indicated air consumption of the air tool.

• Use recommended hose size and length. Don not connect the tool to the airline system 

without incorporating an easy to reach and operate air shut off valve.

• Air supply should be lubricated.

Impact wrench

For tightening and unscrewing of threaded fastener

Ratchet

Tightening and unscrewing of various kinds of bolts and nuts

Drill

For drilling holes in metals, wood and plastics

Screwdriver

For tightening and unscrewind of wood ant metal screws with 

hex and Phillips head

Sanders

To remove layers of paint and filling material

Polisher

To polish painted surfaces and finish surfaces prior to painting

Air saw

For cutting sheet steel, carbody panels, pipes, steel, plastic and 

wood

File

File for metals, wood and plastics

Air hammer

To cut car body panels, bolts, screws and nuts

Needle scaler

To remove rust, paint and cinder after welding

Windscreen cutter

To remove cement, sealing material and rubber from windscreen 

frame

Nibbler

To cut (nibble) car body panels, sheet steel, stainless steel and 

corrugated panel sheets

Shear

With this tool you can cut metal plate

Die grinder stell

For use with bonded abrassive mounted grinding wheels rotary 

files and carbide burrs providing their speed rating matches the 

speed of the grinder

Angle grinder

Light grinding and dressing of welds

Blind riveting

To rivet two metal panels together

Belt sander 

For sanding and polishing in confined areas

Engraving pen

To mark tools and parts made out of metal, stone and other hard 

materials

Cut off tools

Used for cutting operation on bearings, exhaust pipes and clamps

Spot weld drill

For controlled removal of spot welds on car body repairs

Sticker grinder

For removing sticker, labels and tags from painted flat surfaces

Содержание OP 1402













Отзывы:

Нет отзывов