OM 3493
ADAPTER SET +
MECHANICAL-HYDRAULIC CYLINDER 16T
INTRODUCTION
It is compulsory to read this instruction manual
before starting any kind of action.
The proper operation and full compliance of
this product's performance is guaranteed only
if all the instructions provided in this manual
are closely adhered to.
We guarantee that this product complies with
the technical specifications described in this
manual.
The manufacturer shall not be held responsible
for any improper uses other than those
described herein.
Use protective work gloves, protective footwear,
hard hat and safety goggles.
Misuse:
• This product should only be used as
described in this documentation; any other use
is considered improper.
• The manufacturer accepts no responsibility
for any damage caused by the incorrect or
unreasonable use of the equipment.
• Moreover, misuse shall also void the warranty.
Take care of your tools:
• Be sure to store your tools in a clean state.
• Place the tools inside their original package.
CAUTION
- is used to indicate correct operating or maintenance procedures to prevent damages
to the equipment or the surrounding environment:
• Always check the integrity of the mechadraulic screw;
• Keep the hydraulic equipment away from flames, heat and sparks;
• Do not use the mechadraulic screw outside the temperature range indicated in table A;
• In case of topping up or replacement of oil, use hydraulic fluid compatible with the gaskets
assembled on the cylinder, see use temperatures and viscosity table A;
WARNING
- indicates a potential danger that requires correct procedures or practices to avoid
personal injury:
