clas-equipements.com
clas-equipements.com
clas-equipements.com
OH 5306
SERVICE GARAGE JACK 2.25T
CHARACTERISTICS
Load capacity
Dimensions
Lifting range
Weight
2.25T
645x345x185mm
140-490mm
29.5kg
WARNING
1. This is a lifting device only, the load must be supported by other appropriate means. See illustration "A".
2. Do not move or dolly the load while on the jack.
3. Do not operate your jack with passengers in the vehicle or leaning against it.
4. Do not exceed rated load.
5. Do not use any type of extended without authorization by qualifi ed person.
6. Always wear safety glasses when using the equipment.
7. Use only on hard level surface capable of sustaining load, see illustration “B”.
8. Make sure that lift point is stable and properly centered on jack saddle.
9. It is your responsibility to keep warning decals legible and intact. Replacement decals may be obtained from
factory.
10. Study, understand, and follow all the instructions provided with this jack prior to operation.
11. Failure to follow these warnings may result in loss of load, damage to jack, or failure resulting in property
damage, personal, or fatal injury.
12. The owner shall retain this manual for future reference to important warnings, operating and maintenance
instructions.
13. Do not try to adjust the pressure relief valve that was set by the manufacturer.
