CLAS OE 5010, Руководство пользователя, Страница: 13 / 20

OE 5010
MINI BOOSTER 12-24V 800A
How to jump start the vehicle
1. Press the switch button and make sure there are at least 75% power and without low voltage warning beep(if
beeping, please re-charge it);
2. Choose the correct output converter (12v or 24v) according to your vehicle voltage and put the blue plug(EC8)
of the jump cable into the 12V or 24V output converter ensuring a tight fit.
3. Connect the battery clamps to car battery. Red battery clamp must be connected with car battery positive (+)
terminal, while black clamp with negative (-) terminal;
Notes:
• Make the connecting area between the clamps and battery terminals as large as possible;
• Ensure the battery clamps are clean and well connected;
• Ensure the car battery positive (+) terminal and negative (-) terminal are clean and not rusted, or the vehicle
cannot be started.
4. Insert the plug of 12V or 24V output converter into jump start socket
Notes:
• Ensure that the blue plug(EC8) of the jump cable are pushed tightly into the socket of the 12V or 24V output
converter, and that the 4 plugs of the output converter are also pushed all the way into the jump start socket.
Otherwise, it can't jump start the vehicle, and will cause overheating and may even melt the cables .
• If the battery clamps is I24 smart jump cable, please note: if the indicator light in the safety box flashing red and
beeping, it means something wrong. Connect it again, or re-charge the device and then try again.
5. Start the car with the car key to START position;
6. Disconnect the plug within 15 seconds after the start;
7. Remove the clamps.