OE 2001
TYPE 1 WALLBOX WIFI REEL FOR ELECTRIC VEHICLE
POWER SUPPLY
Fault
Cause
Solution
The cable does not completely
wrap.
The cable may be dirty.
Clean the cable with a clean rag
and a little water or liquid not
containing solvent.
The winder is not unlocked.
Pull out the cable and wind it up
to the cable stop pad (FIG.2) (2)
The reel cannot move freely on
the bracket.
Check the wall / ceiling mounting
and make sure the cable has
enough space to move.
The winding spring may be
damaged.
Have the hose checked by
customer service.
The cable cannot be locked in the
desired position.
The release lever may be broken. Have the hose checked by
customer service.
WI-FI interface (FIG. 8)
fan symbol
Local charging overheating
Ventilate the charging room
WI-FI interface (FIG. 9)
fl ashing danger symbol
Cable overheating
Critical error
Charging continues at reduced
power
The charging stops.
Incorrect password
Loss of password
Password recovery (FIG.5): Access
the device by keeping both keys
pressed (9 & 10) for 10 seconds; the
reel starts in the recovery mode
by generating an alternative Wi-Fi
network that can be accessed by
providing the device’s unique PUK
unlock code as a password.
Once reconnected you can reset
or clear the main access password.
Fig. 8
Fig. 9