CLAS OE 1318, Руководство пользователя

Страница: 18 / 28

OE 1318
ELECTRIC ORBITAL SANDER 2.5mm Ø150mm
WARNING
To reduce the risks associated with impact from abrasive product, disc pad, or tool breakup, sharp
edges, hazardous downforce, rupture, vibration and noise:
• Only personnel who are properly trained should be allowed to service this tool.
• If you notice any abnormal noise or vibration when operating the tool, immediately discontinue
its use and inspect for worn or damaged components. Correct or replace the suspect component.
If abnormal noise or vibration still exists, return the tool to us for repair or replacement. Refer to
warranty instructions.
• Prior to use, inspect abrasive product and accessories for possible damage. If damaged, replace
with new abrasive product and accessories available from us.
• Only use accessories supplied or recommended by us.
To reduce the risks associated with vibration:
• If any physical hand/wrist discomfort is experienced, work should be stopped promptly to
seek medical attention. Hand, wrist and arm injury may result from repetitive work, motion and
overexposure to vibration.
To reduce the risks associated with loud noise:
• Always wear hearing protection while operating this tool. Follow your employer’s safety policy or
local/national standards for personal protective equipment requirements.
To reduce the risks associated with fire or explosion:
• Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids,
gases, or dust. The abrasives are able to create sparks when working material, resulting in the
ignition of the flammable dust or fumes.
• Refer to MSDS of material being worked as to potential for creating fire or explosion hazard.
To reduce the risks associated with ingestion of harmful / toxic dusts from sanding surfaces such as
lead painted surfaces, woods and metals:
• Contact with or inhalation of these dusts can endanger the health of operator and bystanders.
Use appropriate personal protective equipment.
• Use appropriate respiratory and skin protection, or local exhaust as stated in the MSDS of the
material being worked on.