OC 9100
REAR PARKING SENSOR PUNCH MASTER TOOL KIT
FORD (23 PCS)
• At this point the drive unit with the thread is first inserted into the matrix' coupling and then screwed by hand.
(Fig. 6)
Warning:
before starting the punching operation, make sure that the mark is oriented exactly as shown in
the figure on the inside of the bumper.
5
6
• To perform the punching, connect the 3/8” ratchet wrench provided in the tool set. Act on the ratchet wrench
to punch the hole (Fig. 7), which will result in a custom hole for the specific sensor support. (Fig.8+9)
• Then install the sensors in the bumper.
7
8
9
Содержание OC 9100
Страница 15: ......
