CLAS OC 0113, Руководство пользователя

Страница: 7 / 12

OC 0113
AUTO DENT REPAIR KIT WITH SLIDE HAMMER
CONTENTS
Warning!
Disconnect the glue gun from the mains before changing accessories, carrying out maintenance
or servicing work.
Keep the glue gun in good condition. Repair or replace damaged parts. Use only recommended
parts. Unauthorized parts can be dangerous and void the warranty.
Always wear eye or face protection when using the glue gun.
Ensure that the work area is clean and clear and that it is adequately lit.
Do not allow the glue gun to get wet or use it in damp or condensed areas.
Do not place the nozzle near your face (especially eyes, ears, etc.) or other people or animals.
Do not allow children or untrained persons to use the glue gun.
Do not allow the glue gun to come into contact with the skin.
Do not inhale the vapours released by the glue.
Do not carry the glue gun with your finger on the power switch or with the power cable.
Do not use the glue gun for flammable liquids, solids or gases such as paint solvents.
Do not leave the glue gun unattended when it is on.
When not in use, turn off the glue gun, disconnect the plug from the power supply and store safely
in the case.
Box to remove small dents without the need to repaint the vehicle surface.
The traction tool for use on a flat surface has large rubber feet to prevent damage to the paint and
rotates 360° to allow use in smaller areas.
The inertial hammer is included for use on larger bumps, corners or curves.
12 pulling tips of different sizes and shapes are included to cover a wide range of bumps. The set
includes a plastic scraper and a spray to remove the glue to avoid damaging the surface.
Contents:
• SA0112: inertial stainless steel pulling end
• SA0113: pulling lever (DSP) to remove dents
• SA4205: glue gun 240V-200°C-30W
• 8 glue sticks
• SA0114: 12 pulling tips of various diameters
• SA0115: nylon chisel to remove the pulling tips
• SA0116: bottle of solvent to remove the pulling tips
• 1 strong PVC box