CLAS EG 6020, Быстрый старт

Страница: 6 / 8

EG 6020
MINI DIGITAL COMPRESSOR 12V
WARNING
INSTRUCTIONS
1. Do not use the inflator continuously for more than 10 minutes. Allow the device to cool down
between uses.
Press «+» «-».
After adjusting the pressure, you must wait until the display flashes 3 times and then press the
power switch, otherwise the device will not start.
2. DO NOT use with 110V- If you want to use the air compressor at home, you must buy an AC
adapter (AC -> DC / 110V -> 12V ).
3. Keep the inflator out of the reach of children and store it in a dry place.
4. This item inflates a medium size car tire in 3 to 5 minutes.
5. Display units: PSI, KPA, BAR, KG/CM
6. DO NOT leave the inflator unattended.
Tire inflation
1. Start the vehicle.
2. Plug the compressor’s cigarette lighter plug into the socket provided.
3. Press the «R» button to select the pressure unit, then press the «+» and «-» buttons to select the
pressure value.
4. Insert the compressor nozzle into the tire valve.
5. 5. Press the on/off button to start inflation.
6. The compressor will automatically stop when the pressure reaches the desired value.
Pressure Control
1. Start the vehicle.
2. Plug the compressor’s cigarette lighter plug into the socket provided.
3. Insert the compressor nozzle into the tire valve.
4. The pressure will be shown on the digital display.
Troubleshooting
Compressor won’t start.
Possible cause: the 12V fuse of the adapter has blown.
Solution: replace the fuse.
Possible cause: the pressure setting may be lower than the actual pressure.
Solution: adjust the pressure setting indicator to a higher level.