CLAS EG 0055, Руководство пользователя, Страница: 7 / 12

EG 0055
CENTRAL VACUUM CLEANER 2x1300W
MAINTENANCE
1. Remove and clean the suction fi lter regularly. The fabric fi lter can be washed with water and
detergent and must be thoroughly dry before reuse.
2. Replace the suction fi lter in case of holes, cuts or similar anomalies.
3. Check and unclog accessories (suction tube, fi ttings, brushes, etc.) in case of obstruction.
4. If necessary, clean the tank and, above all, never leave dust and liquids in the tank for too long.
INSTRUCTIONS
INSTALLATION
1. Check the fi lter installation and the closing of the head-stem hooks. Improper installation of the
fi lter can cause serious problems for the unit.
2. Insert the fl exible tube into the suction port (fi g. 01); apply the appropriate accessory at its end
(fi g. 02).
For the extractor model, insert the
rilsan tube into the junction provided
for this purpose (fi g. 02).
3. Connect the electrical cable of the
unit to the power socket with the
switches in position "0" (OFF).
4. To suck up liquids, empty the dust
container and remove the fabric fi lter.
This operation must only be performed
on models developed for liquid suction.
5. Important: Always replace the fabric fi lter for dust extraction so as not
to cause damage to the unit.
6. The noise of the device is less than 85dB(A).
USE
1. Do not put anything in front of the ventilation areas.
2. Before starting up or during operation of the unit, do not place any
objects on the ventilation areas.
3. Place the device on a reliable and stable support surface.
4. Start the unit by selecting the desired function (engine start, extractor
ignition, power supply control for power tool, etc.).
WARNING
• The unit is equipped with a fl oating valve that stops suction when the
tank is full. Then switch off the unit and empty the tray.
• Do not use the device in the event of
malfunction, reduced performance or if
the electrical parts are poorly insulated.
If necessary, contact the authorized
dealer.
• Make sure that the power cable is not
damaged, otherwise contact the dealer
or an authorized service center.