CLAS EG 0040, Руководство пользователя

Страница: 10 / 16

EG 0040
DRY AND WET VACUUM CLEANER 2x1000W
USE MODE
1
. Connections :
•
Insert the hose connector into the air inlet port as
shown in the picture opposite. Make sure that the
connector is properly attached.
• Connect all accessories as shown in the picture.
2 . Check that the fi lter is properly in place before each
use.
3 . Remove all tank components and the fi lter before
using it to suck up liquid.
4
. Place the wireless power supply on the back of the
terminal connector when using the vacuum cleaner.
5
. Connect the plug to the power supply.
6
. Press the switch, the vacuum cleaner starts working.
• CAUTION: If water comes out from the air outlet,
do not overturn the unit during repair to prevent
water from spilling into the engine and causing
damage.
• Turn off the vacuum cleaner and remove the plug
after each use or for any repairs.
• Keep the vacuum away from strong sunlight and
high temperatures to avoid deformation of the
plastic parts.
• Do not tear, pull or drag the hose to avoid damaging
it.
• Do not immerse or wash the tank cap with water in
case it reaches electrical parts and causes personal
injury. For cleaning: Immerse a cloth and turn it to
wring it out as much as possible. Then gently wipe
the dirty area.
• The vacuum cleaner should only be used by an
adult.
• When cleaning on stairs, take extra care as the
vacuum cleaner may tip and/or fall due to pipe
movements.