EN
G
LI
SH
Assembly instructions
Carefully take out all parts from packaging and lay them out on a flat and level surface.
Tools needed for assembly
Slotted screwdriver
2 medium sized adjustable spanners
Note
Do not completely tighten screws until the assembly is finished. For ease of assembly, we
recommend that you have an assistant.
Rear wheel-axle assembly
The following parts are required:
No. 5
Wheels
No. 6
Rear axel support
No. 7
Rear axel bracket, left
No. 8
Rear axel bracket, right
No. 21 Spacer sleeves
No. 22 Cap nuts
No. 23 Large washers
No. 30 Spring washers for wheels
1.
Slide both left and right axle brackets
(parts 7 and 8) onto threaded ends of axel support (part 6).
2.
Slide spacer sleeves (part 21) onto same threaded ends.
3.
Slide wheels onto same threaded ends.
4.
Secure wheels with large washers (part 23), spring washers (part 30) and finally cap nuts (part
22). Tighten cap nuts clockwise until wheels are firmly in place.
