Clas Ohlson RC4020, Руководство пользователя

Страница: 29 / 44

29
E
N
G
LI
S
H
8.2.2 Connect to the camera with a 3G mobile phone
1.
In the mobile phone’s web browser you type rtsp:// followed by the camera’s/
router’s external IP address followed by the access code.
Example:
rtsp://XXX.XXX.XXX.XXX/1234
where
X
stands for the camera’s
external IP address and 1234 is the access code.
2.
If the camera and the router/firewall are correctly configured the camera image
should be displayed in the mobile phone.
Important:
The mobile phone must support the RTSP protocol to be able to receive the
camera’s video streaming. See mobile phones operating instructions. The
mobile phone plan must also be activated for data traffic via the 3G net.
8.3 Motion detection
Note:
Motion detection can besides moving objects also react on rapid changes in light.
It is therefore recommended that the function is only used on cameras indoors.
1.
Mark the box for one or several areas ( Window 1-4 ). Up to four detection
areas can be defined for detection of movement.
2.
Use the curser to move
the detection area to the one the motion detector
should react to.
3.
Adjust the Threshold for the detection.
4.
Click on Apply to confirm your settings.
5.
Follow chapter
7.4.2 E-mail
to set one or several email addresses to send
the image to.
6.
Activate Motion Detection , type of action (e-mail, FTP or HTTP) and type of
attached file in the menu Event Trigger (see chapter 7.4.5).