Product description
•
Cordless screwdriver with pivoting handle for in-line or pistol-grip use
•
Battery charge indicator, work light and soft-grip handle
•
Charger
•
Forward/Reverse
1. Plug the charger’s DC plug into the charger connection socket (6)
and then connect the charger to a power point.
2. The red LED on the battery indicator comes on when charging is in
progress and goes off when the battery is fully charged.
3. Normal charging takes 5 hours. When the battery is charged:
First disconnect the charger from the power point and then
disconnect the DC connector.
4. For the best possible performance: Do not let the battery remain
fully discharged for a long time.
5. A fully charged lithium-Ion battery will keep its charge for up to six
months if it is not used.
Note:
• Do not use the screwdriver when it is connected to the charger.
• Only use the charger supplied.
• Do not leave the charger connected to the power point after
the screwdriver has been charged.
• Do not charge the battery if the ambient temperature is
below 5 ºC or over 40 ºC.
• The battery does not need to be completely discharged
before charging.
• The charger is for indoor use only.
Operation
1. Select the direction of rotation, the selector (5) has three settings:
•
Reverse:
Press the selector in on the left-hand side.
•
Trigger lock
, selector in the middle.
•
Forward:
Press the selector in on the right-hand side.
2. Pull the trigger (7) to start the screwdriver and release it to stop
the screwdriver.
Adjusting the angle of the handle
Battery check
The screwdriver has a battery indicator (2) with three LEDs which
indicate the battery’s level of charge.
Press the battery test button (3) to activate the indicators.
•
Red:
The battery is discharged.
•
Red + Yellow:
The battery is semi-charged.
•
Red + Green:
The battery is fully charged.
Light
The screwdriver is equipped with a forward-pointing LED light for working
in dark places. Press the on/off switch (8) to turn the work light on.
Remember to turn the light off when you have finished work.
Care and maintenance
Clean the product using a clean soft cloth and a little mild detergent.
Never clean the product using solvents or flammable liquids.
Disposal
Follow local ordinances when disposing of this product. If you are unsure
about how to dispose of this product contact your local authorities.
Specifications
Battery
3.6 V, 1.0 Ah lithium-ion
Charging time
3–5 hours
No-load speed
200 rpm
Torque
Max. 2.5 Nm
Weight
0.4 kg
Charger
Input 230 V, 50 Hz
Output 6 V DC, 300 mA (centre-positive)
1. Magnetic screwdriver bit holder
2. Battery status indicator
3. Battery test button
4. Lock button for in-line or pistol grip
5. Forward/trigger lock/reverse selector
6. Charging socket
7. Trigger switch ON – OFF
8. LED work light on/off switch
Charging
Note:
The battery is semi-charged when sold and must therefore
be charged before it is used for the first time. The battery should be
charged for at least 7 hours the first time it is used.
1. Hold the front of the screwdriver in one hand.
2. Press in the lock button (4) and twist the handle clockwise to
change to in-line or anticlockwise to change to pistol grip.
3. Release the lock button.
1
2 3
4
5
8
7
6
4
