19
E
n
g
li
s
h
N.B.
• Before setting the activation/deactivation you must first set the clock.
See section 6.1.
• If the time for activation/deactivation has already passed the device will activate at
the preset time the following day.
• In order for the Power on function to work: Only turn the photo frame off using
the [POWER] button (15) on the remote control. Do not turn it off using the power
switch (14) on the back of the photo frame.
7. Care and maintenance
Before cleaning the frame, make sure that it is turned off and that the mains adaptor
is unplugged. Wipe the frame using a soft damp cloth.Never use solvents or strong
detergents. Never spray liquid onto the photo frame.
8. Troubleshooting
A. Why can’t the photo frame display all of the files on my memory card/USB
memory?
• Certain memory cards are incompatible with this photo frame. Use a compatible
memory card.
• Unsupported file format (only JPEG images are supprted).
B. There is a memory card inserted into the frame, but the frame cannot read it.
• Make sure that you are using a type of memory card that is supported by the
frame.
• Make sure that the memory card is correctly inserted.
• Unsupported file format (only JPEG images are supprted).
N.B.
Some digital cameras save photos in non-standard formats. Check the camera’s
user manual.
C. Some photos are uploaded quicker than others.
• Photos with high resolution take longer to load. Use photos with lower resolution
for quicker display.
• The recommended resolution is 800 x 600 pixels.
N.B.
The maximum supported resolution is 8000 x 8000 pixels.
D. The device does not start/no photo is shown.
• Check that the mains adaptor is correctly connected.
• Check that the power switch is in the ON position.
