Specific Safety Requirements for Circular Saws
DANGER:
a) Keep hands at a safe distance from the saw blade. Keep your other hand on
the front handle or on the housing. If you are holding the saw with both hands
you cannot cut your hand.
b) Do not reach under the workpiece. The blade guard will not protect you from
the blade underneath the workpiece.
c) Adjust the cutting depth to suit the thickness of the workpiece. Less than the
length of one of the saw blade’s teeth should be visible under the workpiece.
d) Do not hold the workpiece in your hands or across you leg. Fasten the workpiece
to a stable surface. It is important that the workpiece is correctly supported to
minimise the risk of personal injury, to prevent the saw blade from binding and to
prevent you from losing control of the saw.
e) Hold the electrical hand tool by its insulated handles whenever performing tasks
where there is a risk of the saw cutting through hidden power cables or its own
power cable. Contact with a live wire can lead to the metallic parts of the electrical
hand tool becoming live and giving the user an electric shock.
f) When rip sawing, a parallel fence or straight edge guide should be used. This
will improve the precision of the sawing and reduce the chances of the saw blade
binding.
g) Always use saw blades of the correct size and shape (diamond shaped or round).
Saw blades that do not fit the saw properly will rotate eccentrically leading to loss
of control over the saw.
h) Never use damaged or faulty washers or bolts. The washers and bolts for the saw
blade are specially designed to achieve maximum performance and safety.
5
EN
G
LI
S
H
f) Keep the tools sharp and clean. Properly maintained cutting tools with sharp
blades are less likely to jam and are easier to control.
g) Use the electrical hand tool, accessories and such according to the instructions
and in a way suitable for the type of electrical hand tool used. Using the electrical
hand tool for work other than that for which it is intended could result in
a dangerous situation.
5) Service
a) Repairs and service should only be performed by qualified persons, and only with
original spare parts. This guarantees the safety of the electrical hand tool.
Содержание M1Y-140-900A
Страница 2: ...2 ...