English
GREAT BRITAIN •
customer service
tel:
0845 300 9799
e-mail:
internet:
www.clasohlson.com/uk
Ver
. 20140609
Setting the time
Note:
You have no more than about a 3-second interval
between setting the hours and minutes. The clock radio will
revert back to its original setting if you wait more than 3 seconds
between these two stages.
1. Hold in [ TIME SET ] for 2 seconds until the “24 H” symbol
shows in the display.
2. Press [ MEMORY/TIME SET ] to confirm your selections.
The clock display should then begin flashing.
3. Press or hold in [ TUNING-/HOUR ] to set the hours.
4. Press or hold in [ /MINUTE ] to set the minutes.
5. Settings are automatically registered after 3 seconds.
Alternatively you may press [ MEMORY/TIME SET ] to
confirm your settings.
Setting the alarm
• Two separate alarms are available, alarm 1 (AL1) and
alarm 2 (AL2).
• Select either radio or “buzzer”.
1. Press [
/FUNCTION ] until the clock display appears.
2. Make sure that the clock is set to the correct time.
3. Hold in [ VOL-/AL1 ] or [ VOL+/AL2 ] (depending on whether you
are setting alarm 1 or 2) for 2 seconds until “0:00” appears.
4. Press or hold in [ TUNING-/HOUR ] to set the hours.
5. Press or hold in [ /MINUTE ] to set the minutes.
6. Press [ VOL-/AL1 ] or [ VOL+/AL2 ] again to select the type of
alarm, radio or “buzzer”. Your selection will be indicated
(9, 10, 12 and 13) on the display.
7. Press [ MEMORY/TIME SET ] to confirm your selections.
Deactivating the alarm/s
1. Hold in [ VOL-/AL1 ] or [ VOL+/AL2 ] until the set alarm time
begins flashing.
2. Short press [ VOL-/AL1 ] or [ VOL+/AL2 ] twice so that both
alarm indicators disappear.
3. Settings are automatically registered after 3 seconds.
Alternatively you may press [ MEMORY/TIME SET ] to
deactivate the alarm.
Snooze
When the alarm sounds, press [ SNOOZE/DIMMER/SLEEP ]
to activate the snooze function. The alarm will sound again
after 9 minutes.
Sleep timer
1. Press [
/FUNCTION ] to turn the radio on.
2. Hold in [ SNOOZE/DIMMER/SLEEP ] until “90” appears.
3. Short press [
/FUNCTION ] again to select the desired
sleep timer setting (90, 80, 70, 60, 50, 40, 30, 20 and
10 minutes).
4. To deactivate the sleep timer, repeat steps 1 and 2 as
described above until the display shows “OFF”.
Display backlight
Short press [ SNOOZE/DIMMER/SLEEP ] at any time to adjust
the backlight.
FM radio
Note:
Try moving the aerial to another position whenever
you experience bad FM reception. You may also try moving
the radio to another location to address this problem.
1. Make sure that the FM aerial is fully extended.
2. Press [
/FUNCTION ] to turn the radio on.
3. Hold in [ TUNING-/HOUR ] or [ /MINUTE ] until
the station scan begins or short press [ TUNING-/HOUR ]
and/or [ /MINUTE ] to search for stations manually.
4. Adjust the volume level using, [ VOL-/AL1 ] or [ VOL+/AL2 ].
Saving station presets
20 station presets are available.
1. Select the desired radio station.
2. Hold in [ MEMORY/TIME SET ] until an available preset slot
begins flashing.
3. Press [ TUNING-/HOUR ] or [ /MINUTE ] for
selecting a specific preset (1–20).
4. Press [ MEMORY/TIME SET ] to save the station.
5. You may also save the station onto an existing occupied
preset by saving over it.
Selecting existing presets
1. Press [
/FUNCTION ] to turn the radio on.
2. Press [ MEMORY/TIME SET ] repeatedly until the desired
preset appears.
Care and maintenance
• Unplug the clock radio before cleaning it with a damp cloth.
Use only mild cleaning agents for cleaning, never solvents
or corrosive chemicals.
• Unplug the mains lead during thunderstorms or if the clock
radio is not to be used for any extended period.
Disposal
This product should be disposed of in accordance with local
regulations. If you are unsure how to proceed, contact your
local council.
Specifications
Rated voltage
230 V, 50 Hz
Batteries
2 × AA/LR6
Frequency range
FM 87.5–108.0 MHz
Size
12 x 11 x 4.5 cm
