Clas Ohlson HTD54010, Руководство пользователя

Страница: 4 / 20

4 5
E
nglish
Charging the powerbank
1. Connect the included charger lead to the Micro-USB port (4) on
the battery pack and to a computer or other USB charger.
2. The powerbank is fully charged when all battery status LED indicators
are lit. If fully discharged, the powerbank will take about 8.5 hours to charge.
Charging external devices
1. Connect the included charger cable (or the charger cable of the device to
be charged) to the USB port (3) and to the external device.
2. Press the charge/battery status button (1) to start charging. The battery
status LED indicators will light up for a few seconds showing how much
power is left in the powerbank before going out again.
3. To check the battery status of the powerbank whilst charging is in progress,
press the battery status button again.
4. The battery status LED indicators show the powerbank’s remaining charge
level as follows:
Capacity LED 1 LED 2 LED 3 LED 4
75–100 % On On On On
50–75 % On On On Off
25–50 % On On Off Off
10–25 % On Off Off Off
0–10 % Flashes Off Off Off
5. Disconnect the charger cable from the powerbank to finish charging.
Care and maintenance
• Clean the powerbank by wiping it with a damp cloth. Use only mild cleaning
agents, never solvents or corrosive chemicals.
• If the powerbank is not to be used for a long time, the battery should be
charged every three months to keep it in good condition.
• Store the powerbank indoors, in a dry, dust-free place out of
children’s reach.