
5
English
1
2
3
4
Installation
1. Open the battery compartment and remove the right ear pad according to the
picture below and insert the batteries according to the pictures. Make sure the
batteries are correctly aligned.
2. Replace the earpad.
3. Connect the included adaptor to the
DC IN
connection on the transmitter and
then to an available power point.
4. Place the headphones in the charger according to the picture. Make sure the
charging contacts on the headphones are in contact with the charging contacts
on the transmitter.
The headphones must be switched off in order for them
to charge when they are placed in the holder/charger.
The red
CHARGE
light
is lit when charging is in progress. It takes approx. 24 hours to fully charge the
battery for the first time, and thereafter approx 10 hours.