Clas Ohlson HK-TF2144A, Руководство пользователя, Страница: 5 / 28

5
English
Charging the helicopter
The helicopter is charged via the controller.
1. Open the panel on the side of
the controller and withdraw the
charger lead.
2. The on/off switch on the helicopter
should be set to OFF .
3. Connect the charger lead to the helicopter.
4. Switch the controller to
ON .
5. The green charging light on the controller will come on. Charging takes approx.
1 hour. The helicopter is fully charged when the charging light stops shining.
Operation
1. Switch the helicopter and controller on by setting their on/off switches to
ON
.
2. The helicopter light will come on and the controller’s power indicator will flash red.
3. Place the helicopter on the ground with the tail nearest you.
4. When the helicopter is synchronised with the controller it will shine red.
Hovering up and down
Use the throttle lever to manoeuvre the helicopter up and down.
Small, smooth increments only, are required to make the helicopter fly higher or lower.
Spinning clockwise and anticlockwise
Once the helicopter is hovering
steadily, push the rudder to
the left to make the helicopter spin
anticlockwise. Once the helicopter is hovering
steadily, push the rudder to
the right to make the helicopter
spin clockwise.