Clas Ohlson FC362W, Инструкция по эксплуатации

Страница: 6 / 28

6
E
n
g
li
s
h
Use
1. Turn down all volume controls.
2. Press the ON/OFF button on the top of the amplifier.
3. Start a connected audio source.
4. Slowly turn up the volume to the required level.
NOTE: The volume control can be pressed to choose INPUT 1 or the 3.5 mm audio
input on the front of the amplifier or wireless audio transmission.
Using wireless transmission
1. Connect the USB transmitter to the computer. Windows will detect the “SYNIC
wireless audio” transmitter, install the necessary drivers and transmit the audio
via the transmitter.
2. Play a music file on the computer.
3. Press the button on the transmitter to activate wireless music transmission.
An LED flashes on the transmitter.
4. Press the wireless music transmission activation button (11) on the back of
the amplifier. An LED flashes on the front of the amplifier. The LEDs flash rapidly
while contact is being established and slowly when it has been established.
When music is being played, the LEDs are lit with a steady light.
5. Choose wireless music transmission on the remote control or press the volume
control until the blue LED (5) on the front of the amplifier lights up.
6. Slowly turn up the volume to the required level.
NOTE: You only need to press the wireless transmission button once. When contact
has been established it remains active. Wireless transmission only needs to be
re-activated if the operating system of the computer is changed or re-installed.
Points worth bearing in mind!
• Other wireless equipment operating on the same frequency band may
reduce the range of the product.
•
The range of all wireless equipment is affected by obstacles between
the transmitter and the receiver (a concrete wall reduces the signal far
more than a plasterboard partition, for example).
If you are having problems with the operation of the system,
try the following solutions
• Switch off any other wireless equipment to check whether it could be causing
the problem.
• Move the wireless equipment and/or reduce the distance, and reduce the num-
ber of obstacles (walls, furniture, etc.) between the transmitter and the receiver.