Clas Ohlson DJC124-144-UK, Оригинальное руководство пользователя, Страница: 8 / 12

8
3. Charging
NOTE:
The mains adaptor is designed for indoor use only.
1. Press in the battery latch (7) on the battery and pull it forward out of the power tool.
2. Connect the mains adaptor (10) to a wall socket and connect the lead to
the charger (9). The green LED lights up, indicating that the mains adaptor
is connected.
3. Place the charger on the battery and press it home.
4. The red LED lights up when the battery is correctly installed and is being charged.
5. Allow the battery to charge for about 3–5 hours, then remove it from the charger.
When charging is complete, unplug the mains adaptor.
NOTE: The charger does not switch off automatically.
4. Operation
Forward/reverse action
• To change the direction of rotation: Release the trigger switch (5) and allow
the chuck to stop rotating. To change the direction of rotation, press the forward/
reverse selector (4) in the required direction:
- Press in the selector (4) on the left-hand side for anticlockwise rotation
 .
- Press in the selector (4) on the right-hand side for clockwise rotation  .
• Move the selector (4) to the midway position to prevent accidental starting of
the power tool when you are not using it.
Setting the torque
• The power tool has an adjustable clutch to set the required torque with the knob (2).
When correctly set, the power tool stops tightening at the set torque to prevent
the screw being over-tightened.
• The setting depends on the type and size of the screw and the type of material.
Always start with the lowest torque and increase the torque gradually for the result
you want.
Keyless chuck
• The power tool has a rapid-action keyless chuck.
• Hold the rear ring of the chuck with one hand and turn the front part with the other
hand to grip or release the accessory (drill bit, etc.).
Stepless speed control
• Excellent for screwdriving. The more you press the trigger switch (5), the higher
the rotation speed.
• The power tool has an electric brake which operates when you release the trigger
switch, so that the chuck stops quickly.