4
E
n
g
li
s
h
0.5
MIN
0.5
1.7L
1.5
MAX
1
2
3
4
5
6
Product description
Before initial use
Boil clean cold water in the kettle two times in order to rinse it out.
Use
1. Place the base on a stable and level surface.
2. Switch the kettle off by setting the on/off switch to
0
.
3. Fill the kettle with cold water only. Do not overfill the kettle. The water level should
be between the min and max marks.
4. Make sure that the spout filter is in place before using the kettle.
5. Close the lid.
6. Place the kettle on its base.
7. Connect the plug to an earthed power point (220–240 V AC) which is protected by
at least a 10 A fuse.
8. Turn the on/off switch to
1
. The indicator light should now be lit.
9. The kettle shuts off automatically when the water has finished boiling. The power
indicator light will go out.
10. Pull out the plug, or use a time switch between the plug and the power point.
Do not open the lid when pouring out the water.
1. Spout (with filter)
2. Lid
3. Latch
4. Water level gauge
5. On/Off switch with
indicator lamp
0
, 1
6. Base
