5
E
n
g
li
s
h
Operating instructions
1. Connect the adaptor’s mains plug to a 220–240 V, 50/60 Hz wall socket and
the other end to the Bluetooth speaker or insert 6 x AA/LR6 batteries into
the speaker’s battery compartment.
Note:
Observe the (+) and (-) polarity markings
at the bottom of the battery compartment to ensure correct insertion.
2. Set the [ON/OFF] switch to
ON
.
3. Place the Bluetooth speaker into playback mode by pressing [ /
►ll
]. The red LED
will then shine a steady red. The blue LED will flash which indicates that the speaker
is searching for other Bluetooth devices.
4. Activate Bluetooth on the device to be paired and place it in search mode.
5. The speaker dock will appear as “38-5368” on your device. Select this as the device
to be connected. Refer to your device’s instruction manual if you are unsure.
6. Once connection has been established the blue LED will then shine a steady blue.
7. Start playback on the paired device.
Note:
If you are prompted to enter a PIN code, you should enter
0000
(four noughts).
Certain devices may even require you to approve the connection.
AUX IN
1. Connect the external device to the Bluetooth speaker’s 3.5 mm AUX IN jack
(3.5 mm cable sold separately).
Note:
Any streaming from a Bluetooth device will
be muted when connecting another device to the AUX IN jack. When the cable
is removed the speaker will resume audio streaming from the original Bluetooth
device.
2. Start playback on the external audio device.
Care and maintenance
• Unplug the adaptor lead and remove any batteries if the Bluetooth speaker is not
to be used for a long time.
• Clean the product using a lightly moistened cloth. Only use mild cleaning agents,
never solvents or corrosive chemicals.
Содержание CAB-0211
Страница 2: ...2...
