Clas Ohlson 40-6963, Руководство пользователя

Страница: 4 / 16

4
E
n
g
li
s
h
Installation raised off the ground
1. Dig a 30 cm deep hole in the ground where the letter box is to be located.
2. Attach the four legs to the baseplate.
3. Fill the hole in the ground with
concrete (D).
4. Lay a couple of planks (E) over the hole.
5. Lay the baseplate on the planks so
that 2/3 of the legs stick down into
the concrete.
6. Use a spirit level to check that the
baseplate is level.
7. Leave the concrete to dry for 24 hours
before removing the planks.
8. Undo the 4 screws on the baseplate
and place the letter box onto it.
9. Screw the letter box onto the baseplate
from the inside.
Installation directly on
the ground
1. Dig a 30 cm deep hole in the ground
where the letter box is to be located.
2. Attach the four legs to the baseplate.
Bolt the legs onto a concrete slab.
3. Place the concrete slab and baseplate
construction into the hole and fill the
hole with sand and soil.
4. Undo the 4 screws on the baseplate
and place the letter box onto it.
5. Screw the letter box onto the
baseplate from the inside.
Muttrar Gängstav Cement-
platta
Betong Bräder
Nuts Threaded
rod
Concrete
slab
Concrete Planks
Mutterit Kierretangot Sementtilaatta Betoni Laudat
A
B B
D
E E
A
Muttrar Gängstav Cement-
platta
Betong Bräder
Nuts Threaded
rod
Concrete
slab
Concrete Planks
Mutterit Kierretangot Sementtilaatta Betoni Laudat
B
C
A
B B
A
Muttrar Gängstav Cement-
platta
Betong Bräder
Nuts Threaded
rod
Concrete
slab
Concrete Planks
Mutterit Kierretangot Sementtilaatta Betoni Laudat
A
B B
D
E E
A