5
English
Getting started
Turning the device on
1. Connect the mains lead to a wall socket.
2. Press [ STB ] to turn the device on.
Setting the time
1. Press [ MODE ] until the time display appears.
2. Press [ TIME ] for approx 2 seconds until the hours display begins to flash.
3. Press [ PREV ] or [ NEXT ] to change the hours.
4. Press [ TIME ] again to advance to the minutes setting.
5. Press [ PREV ] or [ NEXT ] to change the minutes.
6. Press [ TIME ] for approx 2 seconds to confirm your settings and exit.
Setting the alarm time
1. Press [MODE] until the time appears.
2. Press [ALARM] for approx 2 seconds until the hours display begins to flash.
3. Press the [PREV] or [NEXT] buttons to change the hours.
4. Press [ALARM] again to advance to the minutes setting.
5. Press the [PREV] or [NEXT] buttons to change the minutes.
6. Press [ALARM] for approx 2 seconds to confirm.
Turning the alarm on/off
1. Press [ALARM] for approx 2 seconds until the hours display begins to flash.
2. Press [ALARM] twice until “OFF” appears.
3. Press the [PREV] or [NEXT] buttons to select either ON or OFF.
4. Press [ALARM] for approx 2 seconds to confirm.
Selecting alarm type
1. Press [ALARM] for approx 2 seconds until the hours display begins to flash.
2. Press [ALARM] three times until “U” appears.
3. Press the [PREV] or [NEXT] to select between “U” (USB), “bb” (buzzer) or “R” (radio).
4. Press [ALARM] for approx 2 seconds to confirm.
Note:
• Pressing [SNOOZE] once the alarm sounds will pause it for 9 minutes.
Pressing any other button will turn off the alarm until the next day.
• If no button is pressed when the alarm sounds, it will sound for 1 minute and
pause for 5 minutes. This cycle will repeat three times if no button is pressed
during this time. After three cycles the alarm will turn off until the next day.
• The alarm will not be activated if the device is turned off.
