E
N
G
LI
S
H
. Use
- Place the digital photo frame on a flat surface or hang it on the wall.
- Connect the enclosed transformer to an electrical outlet and to the DC 12V-
input at the bottom of the digital photo frame.
- The digital photo frame works best with only one memory card, USB flash
drive etc. connected at a time. If several storage media are connected
simultaneously, the display will get slower.
- Make sure that everything is plugged in correctly.
1. Insert a compatible memory card or another storage medium, like an USB
flash drive.
2. Turn on the digital photo frame by pressing (1) on the remote control or [ON/
OK] on the top of the digital photo frame.
3. The display will show all connected memory cards or other storage media.
4. Use the arrow buttons [
] and [
] to select memory card/storage medium,
press [ENTER/MENU] to open selected medium (only connected storage
media are shown).
5. Use the arrow buttons [
] and [
] to select what is to be shown on the
screen. Choose between PHOTO, MUSIC, MOVIE or FOLDER, and then
press [ENTER/MENU] to confirm your choice (only the type of files that exist on
the chosen storage medium are shown).
6. Use the arrow buttons [
] and [
] to select a file to be shown on the screen*,
then press [ENTER/MENU] to confirm your choice.
7. The slide show will start automatically after a few seconds with the chosen file.
* It is also possible to select two files at the same time, for example to listen to
music during a slide show.