7
English
Footrest
1. Roll out the footrest on a flat surface with the valve facing upwards.
2. Lift the valve on the footrest
and pull off the cap.
3. Insert the smaller nozzle of
the foot pump into the valve
and pump up the air chamber.
4. Pull out the nozzle, close
the cap and push the valve
into the air chamber.
5. Place the footrest into
the cockpit and push
it with the tip first into
the bow of the kayak.
Backrest × 2
1. Roll out the backrest (3 and 8) on a flat surface with the valve facing upwards.
2. Lift the valve on
the backrest and pull off
the cap.
3. Insert the larger nozzle
of the foot pump into
the valve and pump up
the air chamber.
4. Pull out the nozzle, close
the cap and push the valve
into the air chamber.
Important
Make sure that all the valves are properly closed after inflation.
5. Place the front backrest (3) in the cockpit in line with
the 2 paddle holders (4) on the sides of the kayak.
Note:
The wider part of the backrest must be pointed
downwards and the backrest must be positioned with
the fastening eye towards the stern of the kayak.
6. Pull the second shortest rope through the fastening eye
on the rear of the backrest and securely tie the ends of
the cord in the 2 paddle holders.