E
N
G
LI
S
H
Things to consider when cleaning the spray gun
After spraying with a paint cup. Remove the paint
cup and immerse the tube in a container of an
appropriate solvent. Press the trigger several
times to thoroughly wash all the channels.
Never clean the paint or air nozzles with metal
tools. These parts are precision made and the
slightest scratch can cause faulty spray patterns.
If either of them is damaged it needs to be
replaced before a correct spray pattern can be
achieved.
Air supply
Fit drain taps at every low point
Slope the air hose down
towards the compressor.
Oil &
water
separator
At least 7.5 m
Compressor
Drain tap
Drain tap
The oil and water separator should be at least .5 m from the compressor.
