E
N
G
LI
S
H
1
2
Mounting on a wooden wall
Note!
Make sure that the wall can support the whole weight of the mount and the TV put
together. Contact a professional if you are unsure about this.
1. Choose a solid wall on which to place the mount.
2. Place the mount over two wall studs and use wood screws. If it is only possibly to
secure the mount to one wall stud, place the mount as close to the centre of that stud as
possible and use plaster anchors (not included) and screws for further fastenings.
3. Place the mount against the wall surface and adjust the angle. For guidance, check the
air bubble in the horizontal
inclinometer on the mount.
4. Make four or more markings for drill holes in the screw holes, depending on the weight of
the TV. If the TV is heavy, the mount must be fixed to one or more wall studs.
5. If necessary, pre-drill according to the markings you have made, using for example a
6 mm drill.
6. Have someone hold the mount while you fasten the enclosed wood screws (Q) and the
washers (R) in the holes you have drilled.
7. Make sure that you fasten the screws securely, but mind the wall material. Check the
hanging of the mount by carefully putting a weight similar to that of the TV on the mount
before placing the TV on it.
8. Fasten the cable holder on top of the mount as shown in the picture.
Mounting on a concrete wall
Note!
Make sure that the wall can support the whole weight of the mount and the TV put
together. Contact a professional if you are unsure about this
1. Choose a solid wall on which to place the mount.
2. Place the mount against the wall surface and adjust the angle. For guidance, check the
air bubble in the horizontal
inclinometer on the mount.
3. Make 6 markings for drill holes in the screw holes, depending on the weight of the TV.
4. Drill, using a 10 mm concrete drill, according to the markings you have made.
Important!
When mounting the wall bracket, the holes need to be drilled at least as long
as the screws being used!
5. Clear the holes of dust and put in the plugs (P). Use a hammer to get the plugs the
whole way in.
6. Have someone hold the mount while you fasten the enclosed screws (Q) and the
washers (R) in the plugs.
7. Make sure that you fasten the screws securely, but mind the wall material. Check the
hanging of the mount by carefully putting a weight similar to that of the TV on the mount
before placing the TV on it.
8. Fasten the cable holder on top of the mount as shown in the picture.
