4
Installing Requirement
Carrying capacity
Better use the wall mount brackets supplied together with the product, if not, please
make sure the carrying capacity is not less than 4 times the actual load weight and make sure
the machine can be placed on it stably.
Be sure the mounting surface is not less than 4 times the actual load weight. If the
mounting surface is the building wall or roof, the surface must be solid brick, concrete or
something have equivalent strength. If the mounting surface is loose material (such as brick
wall on old houses, wood etc.) ,metal, non-metal structure, or the decoration layer is too
thick on surface, which strength is obviously insufficient, please take corresponding
measures to strengthen , support it , eliminate security risks exists.
Abstract heat
Requirement
Distancebetween the machine and mounting surface
（
cm
）
Standard Power
Leftside&rightside
Topside
Bottom
Backside
Over 100W
10
20
20
10
Note: If the machine inlay in the wall, or in the box, in addition to meet the above requirements,
the vent area of the bottom, side, top required not less than 50% of the sealing area, keep the air
circulation.
Graphic
：