6
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
HOW TO CHARGE A BATTERY
NOTE:
New batteries must be charged before use.
1. Connect the battery charger to the power supply.
2. Slide the battery on to the battery
charger until the battery clicks
into position.
3. To remove the battery, push the
latches on each side of the
battery and slide it from the
battery charger.
4. After charging, disconnect the
charger from the power supply.
INDICATOR LIGHTS
When the battery pack is secured in the battery charger, the indicator lights
on the battery charger will show the charging status:
WARNING: THE BATTERY CAN BE HOT TO THE TOUCH WHEN REMOVED
FROM THE TOOL. ALWAYS LET THE BATTERY COOL DOWN BEFORE
RECHARGING. DO NOT RECHARGE A HOT BATTERY.
Steady
GREEN
Battery is fully charged or no battery is fitted.
Flashing
GREEN
Charging and the battery is more than 90% full.
Steady RED
Charging
RED and
GREEN lights
both
flashing the
same time
The battery pack is too hot or too cold for charging (below
0°C/32°F or above 45°C/113°). You should let the battery
pack cool down for approximately 30 minutes before
attempting to recharge.