10
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
hexagonal socket and insert. Pull the quick release locking collar backward
with one hand.
Release the quick release collar to retain the tool head assembly (A, B, or C).
Check that the tool head assembly is securely locked in place
.
THE DIE GRINDERS
FITTING THE GRINDING STONE
IMPORTANT: Never use chipped or cracked grindstones.
1. Slip the shank of the chosen
grinding stone into the collet and
tighten the screw cap finger tight.
2. Place the smaller of the two
wrenches (11mm) over the collet
seat to stop the tool from rotating.
3. Use the larger wrench (17mm) to
fully tighten the collet and grip the
stone in position as shown.
4. If another collet is to be used,
undo the screw cap completely and pull out the collet from the collet seat.
Replace it with the new collet and screw the cap loosely back on.
Содержание X-PRO CAT208
Страница 24: ......
