Clarke WoodWorker CCS1 Скачать руководство пользователя страница 2

1

Thank you for purchasing this CLARKE Circular Saw, which is designed for DIY and light
workshop use only.

Before attempting to use the machine, please read this manual thoroughly and follow the
instructions carefully. In doing so you will ensure the safety of yourself and that of others
around you, and you can look forward to the saw giving you long and satisfactory service.

Guarantee

This product is guaranteed against faulty manufacture for a period of 12 months from the
date of purchase. Please keep your receipt which will be required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or tampered with in
any way, or not used for the purpose for which it was intended.

Faulty goods should be returned to their place of purchase, no product can be returned to
us without prior permission.

This guarantee does not effect your statutory rights.

Specifications

Elec. Supply ..................................................................... 230V 50Hz 1 ph

Power Rating .................................................................. 1200W Motor

Fuse Rating ..................................................................... 13amp

No Load Speed .............................................................. 4,500 RPM

Gross Weight ................................................................... 5.7kg

Cutting Capacity @ 90º ................................................ 64mm

Cutting Capacity @ 45º ................................................ 45mm

Blade/Bore Diameter ..................................................... 185/20mm

Please note that the details and specifications contained herein, are correct at the time of going to print. However,

CLARKE International reserve the right to change specifications at any time without prior notice.

Declared vibration emission value in accordance with

EN12096

Measured vibration emission value -

 a:

2.47m/s

2

Uncertainty value - 

K:

0.99m/s

2

Highest measured reading in a single plane

4.56m/s

2

Values determined according to EN28622-1

This product Confirms to 98/37/EEC Regulations

When disposing of this product, ensure it is disposed of according to all local ordinances. It must
not be disposed of with general household waste.

Содержание WoodWorker CCS1












Отзывы: