Clarke WOODWORKER CBS250 Скачать руководство пользователя страница 3

3

Please note that the details and specifications contained herein are correct at the time of going to

print. However CLARKE International reserve the right to change specifications at any time without

prior notice. Always consult the machines data plate

CLARKE GUARANTEE

This CLARKE product is guaranteed against faulty manufacture for a period
of 12 months from the date of purchase. Please keep your receipt as proof
of purchase.

This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.

Faulty goods should be returned to their place of purchase, no product
can be returned to us without prior permission.

This guarantee does not affect your statutory rights.

Please read these instructions carefully before operating the tool

Thank you for purchasing this 

CLARKE 

bandsaw.

Before using the device, please read this manual thoroughly and carefully follow all
instructions given. This is for your own safety and that of others around you, and is also to
help you achieve a long and trouble free service from your new tool.

PARTS & SERVICE TEL:  020 8988 7400

or    e-mail as follows:

PARTS:   [email protected]

SERVICE:    [email protected]

Do not dispose of this product with general household waste. It must be disposed of
according to all laws governing the disposal of waste electrical and electronic
equipment, at a proper waste disposal facility

.

Through purchase of this product, the customer is taking on the obligation to
deal with the WEEE in accordance with the WEEE regulations in relation to the
treatment, recycling & recovery and environmentally sound disposal of the
WEEE.

In effect, this means that this product must not be disposed of with general
household waste. It must be disposed of according to the laws governing Waste
Electrical and Electronic Equipment (WEEE) at a recognised disposal facility.

Содержание WOODWORKER CBS250





















Отзывы: