Clarke Woodworker CBS12WC, Инструкция по эксплуатации и обслуживанию

Страница: 5 / 17

I
A
B
C
D
E
F
G
H
J
K
L
M
C
FRONT
PRINCIPAL PARTS
(Ref. Fig. 1)
A Blade Tension Adjuster Knob
B Blade Guard and Upper Guide Block
Securing Knob.
NOTE: This item is mounted on the back panel,
on model CBS12WC, as indicated by the
dotted line.
C Front Cover Securing Knobs
D Blade Guard
E Upper Blade Guide Block
F Switch Box
G Safety Switch
H Table Trunnion (fig. shows 12WC type)
I Table Tilt Adjuster Knob (fig. shows 12WC
type)
J Motor
K Rip Fence (fig. shows 12WC type)
L Mitre Gauge
M Dust Extraction Outlet
UNPACKING
Unpack the shipping carton and lay out all the items
so that they may be clearly identified as follows:
1. Main Frame Assembly
2. Motor Assembly
3. Switch Box Assembly
4. (CBS12WC) Table Assembly c/w Trunnions
4 (CBS14WC) Table Assembly comprising:
1 Table
2 Trunnions
1 Trunnion base
5. Mitre Gauge Assembly
6. (CBS12WC) Rip Fence
6. (CBS14WC) Rip Fence Assembly
comprising:1 Rip Fence
1 Rip Fence Guide
1 Guide Mounting Plate
7. 1 Bag containing
Allen Key
Adjusting Knobs
Bolts, Screws, Nuts & Washers
Check to ensure that no damage was suffered in
transit, and that all parts are accounted for. You should
contact your CLARKE dealer immediately, should
there be any damage or deficiency
Fig. 1
5