O
4
SAFETY PRECAUTIONS
WARNING
As with all machinery, there are certain hazards involved with their operation
and use. Exercising respect and caution will considerably lessen the risk of
personal injury. However, if normal safety precautions are overlooked, or
ignored, personal injury to the operator, or damage to property may result.
It is in your own interest to read and pay attention to the following rules:
1. COMPRESSED AIR IS DANGEROUS, NEVER direct a jet of air at people or animals,
and NEVER discharge compressed air against the skin.
2. DO NOT operate your compressor with any guards removed.
3. Electrical or mechanical repairs should only be carried out by a qualified
engineer. If problems occur, contact your Clarke dealer.
4. Before carrying out any maintenance, ensure the pressure is expelled from
the air receiver, and the machine is disconnected from the mains supply.
5. DO NOT leave pressure in the receiver overnight, or when transporting.
6. DO NOT adjust, or tamper with the safety valves. The maximum pressure is
factory set, and clearly marked on the machine.
7. DO NOT operate in wet or damp conditions. Keep the machine dry at all times.
Similarly, a clean atmosphere will ensure efficient operation. Do not use in
dusty or otherwise dirty locations.
8. Some of the metal parts can become quite hot during operation. Take care
not to touch these until the machine has cooled down.
9. Always adjust the pressure regulator to the recommended setting for the
particular spray gun or tool being used.
10. When spraying inflammable materials e.g. cellulose paint, ensure that there is
adequate ventilation and keep clear of any possible source of ignition.
11. Protect yourself. Think carefully about any potential hazards which may be
created by using the air compressor and use the appropriate protection. e.g.
Goggles will protect your eyes from flying particles. Face masks will protect
you against paint spray and/or fumes.
12. Before spraying any material always consult paint manufacturers instructions
for safety and usage.
13. Do not exert any strain on electrical cables and ensure that air hoses are not
tangled or wrapped around machinery etc.
14. When disconnecting air hoses or other equipment from your compressor ensure
that the air supply is turned off at the machine outlet and expel all pressurised
air from within the machine and other equipment attached to it.
15. Make sure that children and animals are kept well away from the compressor
and any equipment attached to it.
16. Always ensure that all individuals using the compressor have read and fully
understand the Operating Instructions supplied.
17. Ensure that any equipment or tool used in conjunction with your compressor,
has a safety working pressure exceeding that of the machine.
WARRIOR 60
13
No. Description
Qty
Part No.
50 Reservoir
1
FN17005400V
51 End Plug
2
FN011008000
52 Drain valve
1
FN022020000
53 Wheel
2
FN020001000
54 Push on Fasteners
2
FN015029000
56 Hand Grip
1
FN020121000
58 Rubber Foot
1
FN020093000
59 Valve Assembly
1
FN347043000
60 Valve
1
FN047113001
61 Spring
1
FN047113002
62 Washer
1
FN010041000
64 Valve
1
FN347027000
65 Adapter
1
FN199110140
66 Pressure Gauge-Res
1
FN330007000
No. Description
Qty
Part No.
67 Adapter
1
FN011017000
68 Pressure Gauge-Line 1
FN330006000
69 Tube
-
FN046001000
70 Elbow
1
FN011002000
71 Anti-vibration pads
1
FN199575000
72 Steel Tube
4
FN170HN0010
73 Adapter
1
FN011248000
74 Screw
4
FN014013042
75 Regulator Assy w/filter1
FN319042000
76 Pressure Reg. Assy
1
FN321028000
77 Mains Lead w/plug
1
FN101GA0200
78 Tap Assy
1
FN322008000
79 Quick Release Conn. 1
FN116011065
