Clarke Vantage 17 cable Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 44

Clarke Vantage 17 cable Скачать руководство пользователя страница 1

Form No. 909 6773 000 - 05/2006

Vantage 17 Cable

Operator’s Manual

Manuel d’utilisation

Libro de Instrucciones

EN

ES

FR

READ THIS BOOK

LEA ESTE MANUAL

LISEZ CE MANUEL

English (3 - 21)

Español (23 - 41)

Français (43 - 62)

This book has important information for the use and safe operation of this machine. Failure to read
this book prior to operating or attempting any service or maintenance procedure to your Clarke
machine could result in injury to you or to other personnel; damage to the machine or to other
property could occur as well. You must have training in the operation of this machine before using it.
If your operator(s) cannot read this manual, have it explained fully before attempting to operate this
machine.
All directions given in this book are as seen from the operator’s position at the rear of the machine.
For new books write to: Clarke®, 2100 Highway 265, Springdale, Arkansas 72764.

Order Parts Here:

www.ivie-ent.com/parts

Ph:(918)254-5161

1
2
3
...
»

Содержание Vantage 17 cable













































Отзывы:

Нет отзывов