6
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
ASSEMBLY
Unpack your pressure washer and check to ensure the following items are
present.
Contact your Clarke dealer immediately if any parts are missing or damaged.
CONNECTING THE HANDLE
1. Slide the upper handle into
position as shown.
2. Secure using a bolt, 2 washers and
a nut on each side.
CONNECTING THE WHEELS
1. Slide the axles in to the locating
tube as shown
• Make sure the ball catch locks
into the small hole on the
bottom of the locating tube.
• 1 x Petrol Pressure Washer
• 1 x Spark Plug Box Spanner
• 1 x Hose Holder c/w Fixings
• 1 x Tommy Bar
• 1 x Lance Holder c/w Fixings
• 2 x Wheel & Axle Assemblies
• 1 x High Pressure Hose
• 1 x Nozzle Cleaning Pin
• 1 x Lance Assembly
• 1 x Tap Adaptor
• 1 x Gun Assembly
• 1 x Upper Handle c/w Fixings
