Clarke Strong-Arm CTJ4000G Скачать руководство пользователя страница 2

2

INTRODUCTION

Thank you for purchasing this CLARKE Garage Jack.

Before attempting to use this product, please read this manual thoroughly and 
follow the instructions carefully. In doing so you will ensure the safety of yourself 
and that of others around you, and you can look forward to your purchase 
giving you long and satisfactory service.

SPECIFICATIONS

Length (not including handle):

720 mm

Width:

374 mm

Min height of saddle from floor:

105 mm

Max height of saddle from floor:

520 mm

Weight:

45.5 kg

Number of full strokes to maximum height:

6.5 strokes (63mm per stroke)

Oil Capacity:

250 ml

Rated Load:

4000 kg

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 
months from the date of purchase. Please keep your receipt which will be 
required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for the purpose for which it was 
intended.

Faulty goods should be returned to their place of purchase, no product can 
be returned to us without prior permission.  

This guarantee does not effect your statutory rights.

Содержание Strong-Arm CTJ4000G













Отзывы: