3
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
4. Do not use the stand if it is damaged.
5. Use the stand in a suitable, well lit work area.
6. Keep the work area clean and tidy and free from unrelated items.
7. Do not use the stand when you are tired or under the influence of alcohol,
drugs or intoxicating medication.
8. Use the stand on level and solid ground, preferably concrete. Avoid soft/
unmade ground as the castors may sink in.
9. Ensure all bystanders keep at a safe distance whilst the stand is in use.
10. Do not work underneath an engine mounted on the stand.
11. Never climb on, or attempt to ride on the stand.
12. Take care not to trap your fingers in the adjustable parts of the stand.
13. Due to the weight of the loaded stand, the help of an assistant will be
beneficial when moving the stand around.
14. Never attempt to move a loaded engine stand across a floor having
cracks, pebbles, or other obstacles which might impede its movement.
15. The components of this engine stand are designed to withstand the rated
capacity. Do not substitute any other components or exceed the rated
capacity of the stand.
16. To move a loaded stand, push it from the load side. DO NOT move the
stand from the handle end and never pull the stand towards yourself.
17. Always ensure the engine is properly bolted to the stand.
18. Do not over-reach. Keep your proper footing and balance at all times.
19. Safety equipment such as gloves and non-skid shoes will reduce personal
injuries.
20. Failure to heed these warnings may result in damage to the equipment, or
serious personal injury.
INSPECTION BEFORE USE
1. Always visually inspect the stand before use, to ensure that all parts are
correctly located and secure. Check for cracks, deformation or other signs
of damage or worn parts and check the castors for damage.
Do not use
the stand unless it is totally sound.
2. Check castors to ensure they move freely without undue wear to their
pivots, and that the wheels are not cracked or damaged in any way.
3. Remove any rust or corrosion and repaint for protection
Содержание Strong-Arm CES680
Страница 1: ...ASSEMBLY USER INSTRUCTIONS GC0315 FOLDING ENGINE STAND MODEL NO CES680 PART NO 7610122...
Страница 8: ......
