Clarke Scrubtec Boost 70 Скачать руководство пользователя страница 4

  -4-

                                       CLARKE TECHNOLOGY 

 

Operator's Manual SCRUTBTEC BOOST 70

WARNING:

Maintenance and repairs performed by unauthorized personnel could result in damage or
injury.  Maintenance and repairs must be performed by authorized Clarke Technology
personnel only.

WARNING:

Any alterations or modifications of this machine could result in damage to the machine or
injury to the operator or other bystanders.  Alterations or modifications not authorized by
the manufacturer voids any and all warranties and liabilities.

WARNING:

Electrical components of this machine can "short-out" if exposed to water or moisture.
Keep the electrical components of the machine dry.  Wipe the machine down after each
use.  This appliance is for dry use only and is not to be used or stored outdoors in wet
conditions.

WARNING:

Operating a machine without observing all labels and instructional information could result
in injury or damage.  Read all machine labels before attempting to operate.  Make sure all
of the labels and instructional information are attached or fastened to the machine.  Get
replacement labels and decals from your Clarke Technology distributor.

WARNING:

Wet floor surfaces can be slippery.  Water solutions or cleaning materials used with this
type of machine can leave wet areas on the floor surface.  These areas can cause a
dangerous condition for the operator or other persons.  Always put "Caution" signs
around/near the area you are cleaning.

WARNING:

Improper discharge of waste water may damage the environment and be illegal.
The United States Environmental Protection Agency has established certain regulations
regarding discharge of waste water.  City, state and national regulations regarding this
discharge may also be in effect in your area.  Understand and follow the regulations in
your area.  Be aware of the environment hazards of chemicals that you dispose.

WARNING:

Only use the brushes provided with the appliance or those specified in the Operator's
Manual.  The use of other brushes may impair safety.

CAUTION:

Use of this machine to move other objects or to climb on could result in injury or damage.
Do not use this machine as a step or furniture.  Do not ride on this machine.

CAUTION

:

Your machine warranty will be voided if anything other than genuine Clarke Technology
parts are used on your machine.  Always use Clarke Technology parts for replacement.

CAUTION:

This machine contains lead acid batteries.  The batteries must be disposed of in an
environmentally acceptable manner.

English

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate
collection systems)

This marking shown on the product or its literature, indicates that it should not be disposed with
other household wastes at the end of its working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, please separate this from other
types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their
local government office, for details of where and how they can take this item for environmentally
safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product should not be mixed with other commercial wastes for disposal.

Содержание Scrubtec Boost 70



























Отзывы: